EM600 High-Performance Vector Drive

Dual display  keyboard

  The　entire EM600   series supports  dual-line LED display, and users can    customize the function parameters to be displayed.  

Backup and restore  user parameters

  This function  supports customers to save or  restore their own set    parameters

User customized parameter  display

  Users can customize a single row of  LEDs to display multiple   parameters  of the inverter's running and shutdown status.  

  User -changed  parameter display

  Users can  view the modified function  parameters

High-speed pulse input and  output

  Supports high-speed  pulse input and output of 0~50.00HZ .    

Over-torque detection  protection

Users can set the  over-torque   detection protection time and protection  threshold.

Control settings for  multiple   acceleration and deceleration times  

Four groups of  acceleration and   deceleration time control can be set through terminals and  keyboard.

Switch input and output    corresponding delay

The user can independently  set the   response delay time of the switch input and  output.

Restore user  parameters

This function allows  customers to   save or restore their own parameters.  

Stable and reliable  overvoltage   stall protection

  During the deceleration  process, the inverter protects the machine from   tripping due to a fault caused  by excessive bus voltage.

  PID parameter switching  

  It has two sets of PID parameters, which can be switched through   terminals or  automatically according to deviation.

  Use the up and down keys on the keyboard to set  the PID given    value

  The up and down keys on the keyboard can be used to  quickly set the   PID given  value without entering the parameters.  

The inverter can be used  as a   communication host.

Without the need for a  host   computer,

Multiple inverters can be  linked

  In some cases, multiple  inverters need to run synchronously. In this   case, the frequency source commands  of multiple inverters are set as   communication settings. This can be achieved by  simply setting the   first inverter as the master and the others as slaves. This  ensures   that the set frequencies of multiple inverters are completely consistent    or in the same ratio.

Accurate speed  tracking

After adapting the  corresponding   speed detection card, accurate speed tracking can be  achieved.

Instantaneous stop without  stopping   (applicable to gas stoves

Fans and other important  occasions)

  The inverter automatically operates  when the voltage returns to   normal after  a momentary power outage , a    sudden drop in voltage due to mains and  generator conversion,   etc.

Automatic energy-saving  operation

Automatic energy-saving  operation   can be achieved when light loads such as fans are  used

Fast current  limiting

  Avoid  frequent overcurrent faults of the  inverter and have super   strong load capacity.